Back to the network

R2: show ip protocols

Raw output from the device consoles, with password hashes removed.

*** IP Routing is NSF aware ***

Routing Protocol is "application"
  Sending updates every 0 seconds
  Invalid after 0 seconds, hold down 0, flushed after 0
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Maximum path: 32
  Routing for Networks:
  Routing Information Sources:
    Gateway         Distance      Last Update
  Distance: (default is 4)

Routing Protocol is "rip"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Sending updates every 30 seconds, next due in 24 seconds
  Invalid after 180 seconds, hold down 180, flushed after 240
  Redistributing: rip
  Default version control: send version 2, receive version 2
    Interface             Send  Recv  Triggered RIP  Key-chain
    GigabitEthernet0/1    2     2                                    
  Automatic network summarization is not in effect
  Maximum path: 4
  Routing for Networks:
    172.16.0.0
  Passive Interface(s):
    Embedded-Service-Engine0/0
    GigabitEthernet0/0
    GigabitEthernet0/0.10
    GigabitEthernet0/0.20
    GigabitEthernet0/0.30
    GigabitEthernet0/0.99
    Backplane-GigabitEthernet0/3
    Serial0/0/1
    RG-AR-IF-INPUT1
  Routing Information Sources:
    Gateway         Distance      Last Update
    172.16.12.1          120      00:00:27
    172.16.99.3          120      00:20:28
  Distance: (default is 120)